Artesania audio
PRESTIGE RACK

Artesania audio公司成立於1993年，位於西班牙阿拉貢自治區的巴瓦斯特羅市。Artesania audio創辦人José Luis Lafarga是著名的聲學專家和音樂發燒友，西班牙著名大學研究所的背景讓其有豐富而嚴謹的聲學經驗。Artesania audio從成立至今的主要目標就是製造出高質素的音響架，消除或顯著減少振動在音響設備所產生的有害影響，最終實現音樂再現乾淨，平衡，直接和中性的總體目標。

PLATFORM
A stainless steel, anti-magnetic structure supports a specially treated base to set up a turntable or other components. Different versions and materials are available. Check accessories brochure.

STAINLESS STEEL TOP ATTACHMENTS ON RACK UPRIGHTS
Each top is made with conical recess to support the spikes of the turntable platform.

EXTERNAL STRUCTURE
It ́s made of metal filled with special particles and elastomers. The uprights have a diameter of 60 mm. These factors create a rack heavy, resistant and stable. The resonance coefficient of the structure is significantly lowered. The paint used is textured for diffusion purposes.

INTERNAL SUSPENDED STRUCTURE
Isolated from external structure. Eliminates vibrations that are transmitted from solid and acoustic sources through the creation of decouples; steel needles supported on isolating discs. These provide extra tiers of anti- resonant protection. This suspended audio rack has a triple decoupling.

TEFLON CILINDERS
Support the internal structure and isolates from the external structure. (Diameter 38 mm)

EARTH TERMINAL
To connect electronics (essential for phono) Check manual to connect properly if is necessary.

LINEAR ARMS
Arms made from anti-magnetic stainless steel. The arms hold adjustable spikes (can be located in different positions) also support isolating discs and damping pads. Total flexibility in different positions and easy to change.

BRIDGE BAR
Height variable rear rods strengthen the external structure to guarantee stability and ensure free easy access to install components.

INTERNAL FRAME
These frames are adjustable in height to place any size of component properly. They are locked on the vertical stainless steel bars of the suspended structure.

LINEAR ARMS
Arms made from anti-magnetic stainless steel. The arms hold adjustable spikes (can be located in different positions) also support isolating discs and damping pads. Total flexibility in different positions and easy to change. This system allows to set up the best support position to place electronic components.

ISOLATION DISCS
Support each of the electronic components (without any need for shelves). Easy installation facilitated by an elastic insert which provides stability to place electronic components on the adjustable spikes.

STABILIZER BAR
Located in the internal structure they stop the tiniest pendular movement of the internal structure. Four in each rack, located at the lowest part of the internal structure. Check manual to use it properly.

DECOUPLING BASE
Stainless steel discs support the spikes of the uprights. Two types of floor pads are included, with different sonic behavior, depending on the room acoustics. Check manual to use the proper pads for the bases.