Description
ATC SCM20ASL LE (50週年 Limited Edition限量版)
-
SCM20ASL LE版 售價 HK$105,000(對）「全球限量 只有150對」
- 門市現場展示中
- 所有經本公司出售之 ATC 行貨產品均為英國製造
- 本產品享有5年保養及免費送貨服務(只限香港地區）
In celebration of its 50th Anniversary, ATC is proud to announce a forthcoming release of an exclusive new active stand mount loudspeaker, the SCM20ASL Limited Edition.
Limited to just 150 pairs, the 2-way active stand-mount design is finished in a stunning high gloss lacquer in the ATC company dark blue. Complementing the cabinet, the front baffle is hand-upholstered in royal blue full-grain Napa leather by German leather specialists Eissmann. The exterior alloy components feature a silver anodised finish in striking contrast to the blue lacquer and leather of the cabinet and baffle.
SCM20ASL Limited Edition leather baffle and driver detail.
The SCM20ASL Limited Edition continues ATC’s philosophy of combining the best in-house loudspeaker drive units with matched on-board active amplification for optimal fidelity. The new model integrates a 2-way active system, previously only available in a floor standing model, into a smaller stand-mount cabinet. The SCM20ASL Limited Edition features ATC’s proprietary 150mm/6” ‘Super Linear’ mid-bass driver paired with a 25mm/1” ‘S-Spec’ dual-suspension tweeter. The bass driver operates in a 20-litre sealed cabinet and power is provided by on-board class A/B MOSFET power amplifiers, capable of delivering 200W and 50W continuous power to the bass and HF drivers respectively. The loudspeaker crossovers are active, analogue 2nd order Linkwitz-Riley and an all-pass filter is included to optimise the phase response through the crossover region, resulting in far improved tonal balance and imaging
SCM20ASL Limited Edition amplifier
Input to the loudspeaker is via balanced XLR, located on the rear panel and there are user controls for input sensitivity and low frequency shelf cut/boost. The input sensitivity control allows the user to tailor the input gain to suit their source/pre-amplifier combination, resulting in more consistent performance. The low frequency shelf control gives the user the option to subtly adjust the bass response to suit their room and/or their personal taste. The speaker is supplied with a removeable grille, wrapped in dark blue acoustically transparent cloth.
ACOUSTIC SPECIFICATIONS
Bass/mid driver: 1 x 150mm/6”, SB75-150SL 8Ω
High Frequency Driver: 1 x 25mm/1”, SH25-76S 6Ω
Low Frequency Cut-off: 55Hz (-6dB, anechoic)
High Frequency Cut-off: 25kHz (-6dB)
Crossover Point: 2.2kHz
MaxSPL: 108dB continuous, 114dB peak (per pair, IEC Weighted Pink Noise, 1m, anechoic).
Sensitivity: +4dBu rev 95dBC (Bass Boost 0dB, Input Sensitivity 1V, Pink noise).
ELECTRONIC SPECIFICATIONS
Balanced Input: 1 x Rear Panel Mounted Female XLR, pin 2 hot
Input Impedance: 20kΩ (dif ferential)
Input CMRR: >60dB at (10kHz)
Input Sensitivity: 2.2dBu/1Vrms for full power
Input Sensitivity Control: -6dB switchable, -6dB variable. Total adjustment 2.2dBu/1Vrms to 14.2dBu/4Vrms
Bass Shelf: -2dB to +3dB, switchable in 1dB steps
Crossover Filters: 2nd Order Linkwitz Riley
Amplifier type: Grounded Source MOSFET, class A /B, convection cooled
Output Power: Bass 200W (8Ω), H.F. 50W (8Ω)
THD+N: <0.0017%/-95dB (1kHz, 1dB below rated power, 90kHz BW)
Frequency Response: <2Hz to >200kHz (-3dB)
Limiter: ATC Active FET Momentary Gain Reduction
Electronic amp protection: Amplifier d.c. of fset and over-temperature (both indicated by rear panel LED)
Mains Input: 220-230V or 115V, factory set. Please observe panel markings and labels!
Power Consumption: Idle 26W/41VA. 1/8 Power 116W/116VA. Full Power 312W/398VA
Heat Output: Idle 89BTU/hr, 1/8 Power 311BTU/hr, Full Power 382BTU/hr
PHYSICAL SPECIFICATIONS
Net Weight: 27kgs/59.5lbs
Dimensions: HxWxD 450x250x425mm 17 11/16” x 9 13/16” x 14 3/16”